Linksys NSS4100 Cisco NSS4000 and NSS6000 Series Network Storage System Admini - Page 148
Configuring the Timing Settings, Manager Menu, Admin, Configuration, Configuration Manager, Restore
UPC - 745883578818
View all Linksys NSS4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Managing the NSS Configuring the Timing Settings STEP 1 From the Manager Menu, click Admin Configuration. The Configuration Manager page appears. 7 STEP 2 If the configuration file is located in a location on your network, install it onto a USB flash device and then insert the USB flash device into the AUX-1 port on the front of the NSS chassis. STEP 3 Click Restore. A list of saved configuration files appear. STEP 4 Click Delete for each configuration file you want to remove. Configuring the Timing Settings If you are installing the NSS within the Linksys One environment, the NSS time is automatically set via the Linksys NTP server. When you first configure the NSS, ensure that the NSS has successfully synchronized the time with the NTP server. When the NSS is synchronizing with the NTP time server, the "Synchronizing time with NTP server" message appears and the Update button is grayed out. After the synchronization is complete, you can manually refresh the page by reselecting the NTP Configuration page from the Manager Menu. Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide 140