Linksys NSS4100 Cisco NSS4000 and NSS6000 Series Network Storage System Admini - Page 141

Managing the NSS Managing the NSS Configuration 7 - Network Filters: cleared - Network Default Policy: Accept All - MTU Size: 1500 Managing the NSS Configuration You can save the current configuration settings within a configuration file that can be used to restore the settings at a later time. You can choose to save the configuration file to a volume on the NSS or you can save the file to a USB flash device that is inserted into the AUX-1 port on the front of the chassis. When you save the configuration file, it is time and date stamped and becomes available in the list of available configuration files when you click the Restore button from the Configuration Manager page. After you mount the USB flash device by inserting it into the AUX-1 port, make sure you unmount the USB flash device before you remove it. (To unmount the USB flash device, display the Storage Status page and then click Unmount. NOTE f you restore a configuration file that was saved in an older version of the NSS firmware than the current version, check the settings after you restore the file to make sure that they were updated correctly. To display the Configuration Manager page, from the Manager Menu, click Admin Configuration. Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide 133