Linksys NSS4100 Cisco NSS4000 and NSS6000 Series Network Storage System Admini - Page 155
Changing the Administrator Password, Existing SNMP Trapsinks, Test All, Delete, Reset, admin
![]() |
UPC - 745883578818
View all Linksys NSS4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Managing the NSS Changing the Administrator Password 7 the UPS, 5) the NSS loses contact with the UPS (after communication was successfully established), 6) the UPS is about to shut down the system, 7) the UPS battery needs to be replaced, 8) the NSS cannot talk to the UPS. STEP 6 Click Add. The management station appears in the Existing SNMP Trapsinks list. STEP 7 Repeat steps 4 through 6 for each SNMP server address to which you want to send alerts. STEP 8 To send a test alert for each of the selected conditions to all configured trapsinks, click Test All. To delete an existing SNMP Trapsink, click Delete. Changing the Administrator Password You should change the administrator password from the default to ensure that only authorized individuals can access the NSS configuration interface. If you forget the administrator password, you can only reset it by pressing the Reset button on the NSS chassis and restoring the factory defaults. The default password is "admin." To set up the administrator password: STEP 1 From the Manager Menu, click Admin Password. The Admin Password Configuration page appears. Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide 147
![](/manual_guide/products/linksys-nss6100-cisco-nss4000-nss6000-series-network-storage-administration-guide-69796a6/155.png)