Linksys NSS4100 Cisco NSS4000 and NSS6000 Series Network Storage System Admini - Page 41
Configuring the Network Ports, Network Diagnostics, System Status, Manager Menu, Network, Ports
UPC - 745883578818
View all Linksys NSS4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Adding the NSS to your Network Configuring the Network Ports The Network Diagnostics page appears. 3 STEP 2 Click Test for the cable you want to test. After the test completes, the test results appear in the Link Status area. The test results also appear on the System Status page. If the cable is in good working condition, the link is again accessible to your users. Configuring the Network Ports By default the NSS runs network services on their well known (IETF defined) port numbers. You can change the port on which any particular service runs. When you disable WAN access for a given service, only hosts on the same subnet as the NSS may connect to that service. This is a shortcut to manually defining an equivalent network filter. To set up the network services: STEP 1 From the Manager Menu, click Network Ports. Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide 33