Linksys NSS4100 Cisco NSS4000 and NSS6000 Series Network Storage System Admini - Page 26

Configuring the Network Link IP, IP Address, Netmask, Gateway, Manager Menu, Network

Page 26 highlights

Adding the NSS to your Network Configuring the Network Link IP 3 • IP Address: The IP address for the physical or virtual interface. • Netmask: The netmask for the physical or virtual interface. • Gateway: The address of the gateway for the physical or virtual interface. Configuring the Network Link IP You need to configure the method for assigning an IP configuration to each interface connected to the NSS. NOTE If you hotplug the Ethernet link after the initial installation of the NSS, make sure you that you wait 15 seconds between the time you unplug the cable and then plug it back in. The NSS displays the correct new settings within 10 seconds. To set the IP address allocation method for an interface: STEP 1 From the Manager Menu, click Network IP. The Network IP page appears listing each interface. STEP 2 Click Edit on the row of the interface you want to configure. The Network Link Configuration page appears. Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190

Adding the NSS to your Network
Configuring the Network Link IP
Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
18
3
IP Address
: The IP address for the physical or virtual interface.
Netmask
: The netmask for the physical or virtual interface.
Gateway
: The address of the gateway for the physical or virtual interface.
Configuring the Network Link IP
You need to configure the method for assigning an IP configuration to each
interface connected to the NSS.
NOTE
If you hotplug the Ethernet link after the initial installation of the NSS, make sure you
that you wait 15 seconds between the time you unplug the cable and then plug it
back in. The NSS displays the correct new settings within 10 seconds.
To set the IP address allocation method for an interface:
STEP 1
From the
Manager Menu
, click
Network
¨
IP
.
The
Network IP
page appears listing each interface.
STEP 2
Click
Edit
on the row of the interface you want to configure.
The
Network Link Configuration
page appears.