Linksys WVC200 Cisco Small Business WVC210 Administration Guide - Page 79

Configuring the Cisco WVC210 Internet Camera Software Pan/Tilt Settings 8 • Set Home-Sets the desired Home position. • Current Position-Name the current desired position and then click Add to add into the preset list. You can add up to nine preset points. • Preset Position-Use to delete a preset position. Select the preset position you don't need and then click Delete. Pan/Tilt Control • Pan/Tilt Movement-Check On if you want to use the Pan/Tilt Movement feature. • Default Home Position-Click to reset to the default home position. Rotation Sequence • Rotation Sequence Window-This feature determines how the camera will move when it is set to Rotate. You can set a number of Preset Positions; the camera will go to the first position, then move through the list of preset positions until it is finished. The camera will stop at the last position in the list. - To create the Preset Sequence, select the desired Preset Position in the left column, and click Add >>. Repeat until the desired sequence is complete. Note that you can add the same Preset Position more than once; this can be used to make the camera stay longer at one position. - To delete a position from the Sequence, select the desired position and click Delete. • Time-Determines how long the camera will stay at each position while executing the sequence. Set this to the desired value. WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide 73