Lowrance Elite-4x DSI Sonar and DSI Installation Manual - Page 1

Traditional Sonar and DSI Sonar Installation This document covers the installation of the transducer and display unit installation, which includes connecting the unit to power and installing the unit on the bracket mount. The first section of the document covers the installation of a traditional sonar skimmer transducer. DSI sonar installation is covered in the last section of the manual. Make sure you read all the installation instructions before drilling holes in your vessel! NOTE: This majority of this installation does not apply to the GPS only units since they do not have a transducer. Turn to pages 8-11 for information on mounting the display unit and connecting the unit to power. Traditional Sonar Transducer Installation One piece bracket (Recommended Tools and Supplies - not included) Drill Marine grade above-or-below waterline sealant 1" (25mm) or 5/8" (15mm) drill bit Marine grade epoxy (Shoot-thru-hull install only) #29 (0.136") (3mm) drill bit Zip ties (trolling motor mount) Phillips (Slotted-head) screwdriver TMB-S bracket kit (Skimmer trolling motor mount) 0.TWEETY INSTALL_SONAR_DSI.indd 1 9/14/2011 11:55:30 PM