Lowrance Elite-4x DSI Sonar and DSI Installation Manual - Page 17
Shoot-thru hull, Mounting on trolling motor
View all Lowrance Elite-4x DSI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
3. Drill the mounting holes for the transducer bracket. Use a #29 bit (for the #10 screws). 4. Attach the transducer to the transom using the supplied screws (2). DSI Sonar Shoot-thru hull The DSI transducer can be epoxied to the hull for shoot-thru installations. This is not a recommended installation method since it significantly degrades DSI performance. Mounting on trolling motor Using a flathead screwdriver, depress the release tab and slide off the transducer mount. The optional DSI trolling motor accessory (pn: 00010261-001) is available through LEI Extras at www. lei-extras.com. The Trolling motor accessory allows you to mount the DSI transducer to a trolling motor. You must remove the factory installed transducer mount from the transducer housing before you can install the DSI transducer on a trolling motor. 17 0.TWEETY INSTALL_SONAR_DSI.indd 17 9/14/2011 11:55:43 PM