Lowrance Elite-4x DSI Sonar and DSI Installation Manual - Page 8

Connecting the unit to power - battery

Get Lowrance Elite-4x DSI PDF manuals and user guides View all Lowrance Elite-4x DSI manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

Traditional Sonar 3. Position the transducer so its face is pointing straight down when the trolling motor is in the water. Adjustable strap Plastic ties (not included) Transducer cable Connecting the unit to power 1. Connect the black wire to a ground. 2. Attach a 3 Amp fuse (not included) to the end of the power wire and then connect the fuse to the positive (+) terminal on the battery. 3. Connect the Power cable to the Power port on the back of the display unit. 4. Tighten the adjustable strap securely to the trolling motor. Make sure there is enough slack in the transducer cable for the trolling mount to turn freely. NOTE: Use 18 gauge wire to extend the power or ground wires. 8 0.TWEETY INSTALL_SONAR_DSI.indd 8 9/14/2011 11:55:32 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
8
Traditional Sonar
3. Position the transducer so its face is
pointing straight down when the trolling
motor is in the water.
4. Tighten the adjustable strap securely
to the trolling motor. Make sure there is
enough slack in the transducer cable for
the trolling mount to turn freely.
Connecting the unit to power
1.
Connect the black wire to a ground.
2.
Attach a 3 Amp fuse (not included) to
the end of the power wire and then con-
nect the fuse to the positive (+) terminal
on the battery.
3.
Connect the Power cable to the Power
port on the back of the display unit.
Adjustable strap
Plastic ties (not
included)
Transducer
cable
NOTE:
Use 18 gauge wire to extend the
power or ground wires.
0.TWEETY INSTALL_SONAR_DSI.indd
8
9/14/2011
11:55:32 PM