MSI 970A User Guide - Page 78
AMD RAID, step 3 and press Enter., The next screen should confirm that you have selected the RAID
View all MSI 970A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
AMD RAID Installing Driver ■ New Windows 7/ Windows XP Installation The following details the RAID driver installation while installing operating system. 1. When you start installing Windows XP, you may encounter a message stating, "Setup could not determine the type of one or more mass storage devices installed in your system". If this is the case, then you are already in the right place and are ready to supply the driver. If this is not the case, then press F6 when prompted at the beginning of Windows setup.. 2. Press the "S" key to select "Specify Additional Device". 3. You should be prompted to insert a floppy disk containing the AMD® RAID driver into the A: drive. Note: For Windows XP, you can use the USB floppy drive only. For Windows 7 you can use CD/ DVD/ USB drive. Important Please follow the instruction below to make a "RAID Driver" for yourself. • Insert the MSI Driver Disc into optical drive. • Click the "Browse CD" on the Setup screen. • Copy all the contents in the : \\ChipSet\AMD\Package\Drivers\SBDrv\SB9xx\RAID (and then, please select a folder which was classified according to OS.) • The driver diskette for RAID Controller is done. 4. For Windows 7: During the Operating system installation, after selecting the location to install Windows 7 click on "Load Driver" button to install a third party SCSI or RAID driver. 5. When prompted, insert the floppy disk or media (CD/DVD or USB) you created in step 3 and press Enter. 6. You should be shown a list of available SCSI Adapters. 7. Select the appropriate RAID controller and press ENTER. 8. The next screen should confirm that you have selected the RAID controller. Press ENTER again to continue. 9. You have successfully installed the RAID driver, and Windows setup should con- tinue. 10. Leave the disk in the medium until the system reboots itself. Windows setup will need to copy the files from the medium again after the RAID volume is formatted, and Windows setup starts copying files. B-8