MSI E7320 User Manual - Page 16
Central Processing Unit: CPU - intel xeon
View all MSI E7320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
mPGA604 mPGA604 Hardware Setup Central Processing Unit: CPU The mainboard supports Single/Dual Intel® Xeon™ processor(s). The mainboard uses two CPU sockets called Socket 604 for easy CPU installation. You can install SINGLE or DUAL CPUs on the board to meet your own needs. Keep the following points in mind before installing CPU(s): 1. If SINGLE CPU is intended, always install the CPU on the CPU1 socket. CPU1 Recommended inlet air direction BIOS 2. To install DUAL CPUs on the board, you must use the same type of CPUs running at the same FSB frequency. When you are installing the CPU, make sure the CPU has a Heat Sink and a cooling fan attached on the top to prevent overheating. If you do not find the Heat Sink and cooling fan, contact your dealer to purchase and install them before turning on the computer. MSI Reminds You... Overheating will seriously damage the CPU and system, always make sure the cooling fan can work properly to protect the CPU from overheating. The system temperature needs to remain under 45°C. We highly recommend that the direction of inlet air should follow the direction indicated above for better cooling effect. Replacing the CPU While replacing the CPU, always turn off the SSI power supply or unplug the power supply's power cord from grounded outlet first to ensure the safety of CPU. 2-3