MSI E7320 User Manual - Page 17
CPU Installation Procedures for Socket 604
View all MSI E7320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
MS-9152 ATX Server Board CPU Installation Procedures for Socket 604 1. Please turn off the power and unplug the power cord before installing the CPU. Open Lever Sliding Plate 2. Pull the lever sideways away from the socket. Make sure to raise the lever up to a 170-degree angle. Gold arrow 3. Look for the gold arrow. The gold arrow should point towards the lever pivot. The CPU can only fit in the correct orientation. 4. If the CPU is correctly installed, the pins should be completely embedded into the socket and can not be seen. Please note that any violation of the correct installation procedures may cause permanent damages to your mainboard. Gold arrow Gold arrow 5. Press the CPU down firmly into the socket and close the lever. As the CPU is likely to move while the lever is being closed, always close the lever with your fingers pressing tightly on top of the CPU to make sure the CPU is properly and completely embedded into the socket. Close Lever Correct CPU placement O Incorrect CPU placement X Press down the CPU 2-4