MSI K7D MASTER User Guide - Page 67
HDD Power Down, HDD Down In Suspend, Soft-Off by PBTN, PWRON After PWR-Fail, Wake-Up by PCI Card, RI
![]() |
UPC - 816909002010
View all MSI K7D MASTER manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
AWARD® BIOS Setup HDD Power Down When enabled and after the set time of system inactivity, the hard disk drive will be powered down while all other devices remain active. Settings are: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 Min and Disabled. HDD Down In Suspend When enabled, the hard disk drive will be powered down while other devices are in suspend mode. Settings are: Disabled, Enabled. Soft-Off by PBTN This allows you to set the time period for pressing the power button to force the system to enter the Soft-Off mode. Settings are: Delay 4 Sec and InstantOff. PWRON After PWR-Fail This allows you to set whether you want your system to reboot after the power has been interrupted. Off leaves your system off and On reboots the system. Former-Sts leaves the system in the former status. Setting options: Off, On and Former-Sts. Wake-Up by PCI Card This will enable the system to wake up through PCI card peripheral. The settings are: Enabled or Disabled. RI Resume/WOL RI refers to Ring In. When set to Enabled, the system will resume from the standby or suspend power saving mode whenever Modem Ring In event occurs. To use the WOL function, you need a LAN add-on card which support power on functions. Settings are: Enabled or Disabled. Modem Use IRQ This determines the IRQ in which the MODEM can use. The settings are: 3, 4, 5, 7, 9, 10, 11 and NA. RTC Resume This allows you to set the date and time alarm for your computer to boot up. During Disabled, you cannot use this function. During Enabled, you can set the date and time alarm. 3-21
![](/manual_guide/products/msi-k7d-master-user-guide-a5ab1ae/67.png)