MSI K7D MASTER User Guide - Page 95
Software Installation - usb drivers
![]() |
UPC - 816909002010
View all MSI K7D MASTER manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
USB 2.0 Controller Card Software Installation This section will tell you how to setup your USB controller card. The USB Controller card is "Plug and Play', it means there is no jumper, IRQ, or DIP switch to set. Windows® 98SE Setup 1. Windows will auto-detect the USB Card and display a dialog "New Hardware found" during system boot up. Press "Next" on the "Add New Hardwae Wizard" screen. Note: Because of 2 OHCI and 1 EHCI Cores, system will require to install respective driver three times. Don't be confused and follow subsequent procedures. 2. Select "Search for the best driver for your device(Recommended)" and click "Next". B-7
![](/manual_guide/products/msi-k7d-master-user-guide-a5ab1ae/95.png)
USB 2.0 Controller Card
B-7
Software Installation
This section will tell you how to setup your USB controller card.
The USB
Controller card is “Plug and Play’, it means there is no jumper, IRQ, or DIP
switch to set.
Windows
®
98SE Setup
1.
Windows will auto-detect the USB Card and display a dialog “
New
Hardware found
” during system boot up.
Press “
Next
” on the
“
Add New Hardwae Wizard
” screen.
2.
Select “
Search for the best driver for your device(Recommended)
”
and click “
Next
”.
Note:
Because of 2 OHCI and 1 EHCI Cores, system will require to install
respective driver three times.
Don’t be confused and follow subse-
quent procedures.