Magellan SporTrak User Manual - Page 53

Customizing Selecting Setup Setup allows you to initialize the receiver and set system parameters to your preference. From any NAV screen Select FIG. SETUP D Selecting Initialize By initializing your receiver, you establish the initial position for the receiver. This will enable the receiver to search the sky for available satellites. You will need to reinitialize if you have traveled more than 300 miles while the receiver is turned off. To initialize: Select SETUP FIG. E Select INITIALIZE Follow the steps requested to initialize, as done when the receiver was initialized the first time (see Getting Started). Disabling NAV Screens You may find that you do not use one, or more, of the nine NAV screens provided in the receiver. You have the option to disable NAV screens, except for the STATUS and POSITION screens. MENU COORD SYS MAP DATUM ELEV MODE PROJECTION TRIP RESET WAYPOINTS ROUTES SETUP SUN/MOON FISH/HUNT CONTRAST ALARM/MSG Figure D. Refer to this screen anytime you want to access Setup. SETUP INITIALIZE NAV SCREENS COORD SYSTEM MAP DATUM ELEV MODE TIME FORMAT NAV UNITS NORTH REF LIGHT TIMER BEEPER PERSONALIZE CLEAR MEMORY NMEA BAUD RATE SIMULATE Figure E. If you need to initialize again, make this selection. The default for the TIME screen is off. Magellan SporTrak 45