Magnavox MRD210 User Manual - Page 14

Preparations - dvd

Page 14 highlights

English Preparations Inserting batteries into the remote control 1 Open the battery compartment. 2 Place the batteries in the compartment with the correct polarity as indicated by "+" and "-" symbols. 3 Close the cover. CAUTION! - Remove batteries if they are exhausted or if the remote is not to be used for a long time. - Do not use old and new or different types of batteries in combination. - Batteries contain chemical substances, so they should be disposed off properly. Switching on the system 1 After completing all the connections, connect the AC power cord of the player to the power outlet. 2 Press STANDBY ON to switch on the last selected source. 3 Press the SOURCE button (or TV/AV, DISC, TUNER or AUX on the remote) to select the input source. ➜ The selected source is displayed. G For viewing a DVD or VCD disc, you have to connect a TV (refer to "Connections - Connecting a TV".) Switch on the TV and set to the correct video in channel (for example, EXT1, EXT2, AV1, AV2.) Refer to your TV instruction manual for details. ➜ The default screen appears on the TV. Setting up the surround sound system You must connect all the speakers and set up the system properly in order to enjoy the Digital Cinema experience at home (refer to "Connections - Connecting the speakers and passive subwoofer".) You will have the feeling of being in the middle of the action because sound is coming from everywhere around you. The subwoofer can enhance the bass performance of your system dramatically. IMPORTANT! Please sit at your usual listening position in order to set up the speaker balance correctly. Placing the speakers To obtain the best surround effect, place the speakers as follows. 1 Place the front left and right speakers at equal distances from the TV and at an angle of approximately 45 degrees from the listening position. 2 Place the center speaker above or below the TV so the center channel's sound is localized. 3 Place the surround speakers at normal listening ear level facing each other or mounted on the wall. 4 Place the subwoofer on the floor near the TV. Notes: - To avoid magnetic interference, do not position the front speakers too close to your TV. - If the rear surround speakers are installed farther away from the listening position than the front and center speakers, it will weaken the surround effect. - All speakers should be securely installed to prevent accidents and improve sound quality. 12 PREPARATIONS

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29

12
English
Inserting batteries into the
remote control
1
Open the battery compartment.
2
Place the batteries in the
compartment with the correct
polarity as indicated by “
+
“ and “
-
symbols.
3
Close the cover.
CAUTION!
Remove batteries if they are exhausted or if the
remote is not to be used for a long time.
Do not use old and new or different types of
batteries in combination.
Batteries contain chemical substances, so they
should be disposed off properly.
Switching on the system
1
After completing all the connections, connect the AC
power cord of the player to the power outlet.
2
Press
STANDBY ON
to switch on the last selected
source.
3
Press the
SOURCE
button (or
TV/AV
,
DISC
,
TUNER
or
AUX
on the remote) to select the input source.
The selected source is displayed.
For viewing a DVD or VCD disc
, you have to connect
a TV
(refer to “
Connections - Connecting a TV
”.)
Switch on the TV and set to the correct video in channel
(for example, EXT1, EXT2, AV1, AV2.)
Refer to your TV
instruction manual for details.
The default
screen appears on the TV.
Setting up the surround sound
system
You must connect all the speakers and set up the system
properly in order to enjoy the Digital Cinema experience at
home (refer to “
Connections - Connecting the speakers
and passive subwoofer
”.)
You will have the feeling of being
in the middle of the action because sound is coming from
everywhere around you.
The subwoofer can enhance the
bass performance of your system dramatically.
IMPORTANT!
Please sit at your usual listening position in order
to set up the speaker balance correctly.
Placing the speakers
To obtain the best surround effect, place the speakers as
follows.
1
Place the front left and right speakers at equal distances
from the TV and at an angle of approximately 45 degrees
from the listening position.
2
Place the center speaker above or below the TV so the
center channel’s sound is localized.
3
Place the surround speakers at normal listening ear level
facing each other or mounted on the wall.
4
Place the subwoofer on the floor near the TV.
Notes:
To avoid magnetic interference, do not position the front
speakers too close to your TV.
If the rear surround speakers are installed farther away
from the listening position than the front and center speakers,
it will weaken the surround effect.
All speakers should be securely installed to prevent
accidents and improve sound quality.
Preparations
P
REPARATIONS