Magnavox MRD210 User Manual - Page 16

English Picture Setup S-VIDEO TV SHAPE Select the aspect ratio of the TV to be connected. If your DVD is not encoded to allow you to change the aspect ratio,TV shape cannot be changed. 4:3 PS (panscan) Select this if you have a conventional TV set and your DVD is not formatted for widescreen viewing. A wide picture is displayed on the whole TV screen with a portion automatically cut off. 4:3 LB (letterbox) Select this if you have a conventional TV set and your DVD is formatted for widescreen viewing. Wide bands is displayed on the upper and lower portions of the TV screen. 16:9 (widescreen) Select this if you have a widescreen TV set (you must also set your widescreen TV to "full size".) TV SYSTEM Allows you to select the color system that corresponds to your TV. AUTO Select this if the connected TV is multi system. The output format will be in accordance with the video signal of the disc. NTSC Select this if the connected TV is NTSC system. It will change the video signal of a PAL disc and output to NTSC format. PAL Select this if the connected TV is PAL system. It will change the video signal of an NTSC disc and output to PAL format. VIDEO OUT Set the Video Output according to your video connection. This setting is not required if you are using the VIDEO OUT jack (yellow) to connect the DVD system to your TV. PR PB Y / SCART Select this if you have connected the DVD system to your TV using the Component Video Out (Pr/Cr Pb/Cb Y) jacks. (SCART - not available for this version) S-VIDEO Select this if you have connected the DVD system to your TV using S-Video jack. SCR SAVER (Screen Saver) OFF Select this to disable the screen saver function. ON Select this if you wish to dim the TV screen when the disc playback is stopped or paused for more than five minutes. This will prevent your display device from becoming damaged. Sound Setup DIGITAL OUTPUT Allows you to specify the type of digital output suitable for the optional audio equipment that connected through the DIGITAL OUT at the rear of your DVD system. ALL Select this if you have connected the digital output (COAXIAL or OPTICAL) to a multichannel decoder receiver. PCM 96K Select this if the optional audio equipment is capable of processing digital signal input with sampling rates of 96 kHz. PCM 48K Select this if the optional audio equipment is incapable of processing 96 kHz digital signal input. The signal will then be converted to a standard signal with sampling rates of 48 kHz. OFF Select this to deactivate the digital output (COAXIAL or OPTICAL.) 14 PREPARATIONS