Makita LS1016 Technical Reference - Page 12
] DISASSEMBLY/ASSEMBLY, 3]-2. Gear Spiral bevel gear 32, Helical gear 14, Helical gear 27,
View all Makita LS1016 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
P 12/ 37 Repair [3] DISASSEMBLY/ASSEMBLY [3]-2. Gear section (Spiral bevel gear 32, Helical gear 14, Helical gear 27, Helical gear 28) (cont.) DISASSEMBLING (6) Helical gear 28 and Spindle can be disassembled as illustrated in Figs. 25. Fig. 25 Disassemble Ball bearing 608DDW with 1R269. And remove Retaining ring S-15 from Spindle with 1R291. 1R269 1R291 Receiving Ball bearing 6002DDW with the table of Arbor press, press down Spindle with Arbor press. Helical gear 28 Ball bearing 608DDW Retaining ring S-15 Spindle Bearing box Ball bearing 6002DDW Spindle ASSEMBLING (1) Assemble Helical gear 28 section to Bearing box as illustrated in Fig. 26. And then, assemble Retaining ring S-15 and Ball bearing 608DDW to Spindle. Refer to Fig. 25. (2) Assemble Helical gear 27 section to Bearing box as illustrated in Fig. 27. Fig. 26 Ball bearing 6002DDW 1R232 Spindle Helical gear 28 Bearing box Rim portion has to be faced to Bearing box side. 1R036 Fig. 27 Assemble Helical gear 27, Ball bearing 6000ZZ and Steel ball 4 to Gear shaft. And then, assemble the Helical gear 27 section to Bearing box. Convex side Steel ball 4 Gear shaft Helical gear 28 The convex side has to be faced to Gear shaft end on which Steel ball 4 is mounted. Helical gear 27 Ball bearing 6000DDW