Makita LS1016 Technical Reference - Page 17

Repair [3] DISASSEMBLY/ASSEMBLY [3]-5. Turn Base, Base P 17/ 37 DISASSEMBLING (1) Remove the parts from Turn base and Base as illustrated in Fig. 37. (2) Removing M8x45 Hex bolt, separate Turn base section from Base as illustrated in Fig. 38. Fig. 37 1. Remove Upper fence, Lower fence, Guide fence and Kerf board. Lever 45 (2pcs.) Upper fence (2pcs.) 2. Turning Grip 50 clockwise at 90 degrees, move Turn base to the direction designated with black arrow until it stops. Kerf board 3. Remove Miter scale plate from Base by unscrewing 4x12 Tapping screw (3pcs.) Lower fence (2pcs.) Guide fence Grip 50 Fig. 38 Remove M8x45 Hex bolt with Socket wrench 13. And remove Flat washer 8. Turn base section M8x45 Hex bolt Flat washer 8 Base Miter scale plate Lock lever While pressing down Lock lever, remove Turn base section from Base. ASSEMBLING Assemble Turn base section as illustrated in Fig. 39. And then, take the disassembling step in reverse. Refer to Fig. 37. Fig. 39 Apply Grease to Slide plate and the center hole of Base before assembling Turn base section. Turn base section has to be tightened with M8x45 Hex bolt so that it can smoothly turn without wobbling. M8x45 Hex bolt Flat washer 8 Lock lever Slide plate While pressing down Lock lever, fit Turn base section to Base. Base