Makita LS1016 Technical Reference - Page 13
Fig. 28, Fig. 29
![]() |
View all Makita LS1016 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
P 13/ 37 Repair [3] DISASSEMBLY/ASSEMBLY [3]-2. Gear section (Spiral bevel gear 32, Helical gear 14, Helical gear 27, Helical gear 28) (cont.) ASSEMBLING (3) Assemble Helical gear 14 to Bearing box as illustrated in Fig. 28. (4) After mounting Grease holder, set Spiral bevel gear 32 to the shaft of Helical gear 14 as illustrated in Fig. 29. Fig. 28 Pressfit Ball bearing 608DDW to Bearing box. Tighten provisionally Bearing retainer 14-23. Assemble Helical gear 14 with 1R045 and R346. Spindle Helical gear 28 1R045 Helical gear 27 1R346 Ball bearing 608DDW Bearing retainer 14-23 Helical gear 14 Fig. 29 Tighten Grease holder with 4x12 Tapping screws. 4x12 Tapping screw (2pcs.) While fixing Woodruff key 4 by finger, align the notch of Spiral bevel gear to the Woodruff key and push down the Gear. Spiral bevel gear 32 can be assembled to the shaft of Helical gear 14. Spiral bevel gear 32 Grease holder Woodruff key 4
![](/manual_guide/products/makita-ls1016-technical-reference-d8582fe/13.png)