Marantz SR7005 SR7005 User Manual - English - Page 28

ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Connect a device that has a multichannel output terminal • You can connect this unit to an external device fitted with multi-channel sound audio output jacks to enjoy music and video. • The video signal can be connected in the same way as a Blu-ray Disc player / DVD player (vpage 17 "Connecting a Blu-ray Disc player"). Cables used for connections Audio cable (sold separately) Audio cable (White) L L (Red) R R Audio cable Blu-ray Disc player / DVD player / External decoder SUBWOOFER FRONT LR AUDIO CENTER SURROUND LR SURROUND BACK LR Connecting a external power amplifier • You can use this unit as a pre-amp by connecting a commercially available power amp to the PRE OUT connector. Adding a power amp to each of the channels provides an even greater sound presence. • Select the terminal to use and connect the device. Cables used for connections Audio cable (sold separately) (White) L L Audio cable (Red) R R Audio cable Power amplifier SUBWOOFER FRONT AUDIO CENTER SURROUND LR LR SURROUND BACK LR LR LR LR LR LR LR LR LR LR LR LR LR in Set as Necessary To play analog signals input from 7.1CH INPUT terminals, set "Input Mode" (vpage 73) to "7.1CH IN". "7.1CH IN" can also be selected with A/D on the remote control unit. When a device is connected to the SBL/SBR terminal of 7.1CH INPUT terminals, set "Amp Assign" (vpage 80) to "Normal". • When using just one surround back speaker, connect it to the left channel (L) terminal. • Use the volume control on the subwoofer to control subwoofer volume. • If the subwoofer volume sounds low, use the volume control provided on the subwoofer to adjust the volume. NOTE • When an external power amp is connected to the PRE OUT terminal, do not connect speakers to the speaker terminals. • Depending on the settings in the "Amp Assign" (vpage 80) menu or listening mode, the channel output from the SBL terminal or SBR terminal of the PRE OUT terminal differs. 24