Marantz SR7005 SR7005 User Manual - English - Page 84

ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA Manual Setup Speaker Setup Default settings are underlined. Perform when setting the speakers manually or when changing settings made in Audyssey Auto Setup. • If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible to select MultEQ XT, Dynamic EQ and Dynamic Volume (vpage 76, 77). • Manual Setup can be used without changing the settings. Please set if necessary. Setting items Setting details Amp Assign Set the speakers connected to this unit. Normal : Set when using surround back, front height or front wide speakers. ZONE2 : Set for connecting the speakers for ZONE2 to the SURR.BACK/ AMP ASSIGN terminals. ZONE3 : Set for connecting the speakers for ZONE3 to the SURR.BACK/ AMP ASSIGN terminals. SPKR-C : Set for connecting a tweeter of a front speaker to the SURR. BACK/AMP ASSIGN terminals and a woofer of a front speaker to the FRONT terminals. Speaker Config. Front : Set the front speaker size. Select speaker configuration • Large : Use a large speaker that can adequately play back low and size (bass reproduction frequencies. capability). • Small : Use a small speaker that has inadequate playback capacity for NOTE low frequencies. Do not use the outward shape of the speaker to • When "Subwoofer" is set to "No", "Front" is automatically set to determine selection of a "Large". "Large" or "Small" speaker. • When "Front" is set to "Small", "Center", "Surround", "S.Back", Instead, use the frequencies "F.Height" and "F.Wide" can not be set to "Large". set in "Crossover Center : Set the presence and size of the center speaker. Frequency" (vpage 82) as • Large : Use a large speaker that can adequately play back low the standard for determining frequencies. bass reproduction capability. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when a center speaker is not connected. "Large" is not displayed when "Front" is set to "Small". Subwoofer : Set the presence of a subwoofer. • Yes : Use a subwoofer. • No : Select when a subwoofer is not connected. When "Front" is set to "Small", "Subwoofer" is automatically set to "Yes". Setting items Speaker Config. (Continued) Setting details Surround : Set the presence and size of the surround speakers. • Large : Use a large speaker that can adequately play back low frequencies. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the surround speakers are not connected. • When "Surround" is set to "Large", "S.Back", "F.Height" and "F.Wide" can be set to "Large". • When "Surround" is set to "None", "S.Back", "F.Height" and "F.Wide" can automatically set to "None". S.Back : Set the presence, size and number of surround back speakers. • Large : Use a large speaker that can adequately play back low frequencies. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the surround back speakers are not connected. • 2spkrs : Use two surround back speakers. • 1spkr : Use only one surround back speaker. When you select this setting, connect the surround back speaker to the left (L) channel. Even when the "S.Back" setting is other than "None", sound may not be emitted from the surround back speaker, depending on the playback source. NOTE When "Amp Assign" setting (vpage 80) is other than "Normal", you cannot make the "S.Back" setting. F.Height : Set the presence and size of the front height speakers. • Large : Use a large speaker that can adequately play back low frequencies. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the front height speakers are not connected. NOTE When "Amp Assign" setting (vpage 80) is other than "Normal", you cannot make the "F.Height" setting. 80 Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu