Marantz SR7005 SR7005 User Manual - English - Page 60
RS-232C connector, DC OUT TRIGGER OUT jacks
View all Marantz SR7005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA RS-232C connector By connecting an external serial controller, you can control all sorts of household electrical devices (including lights, electric curtains, and air conditioning units) in addition to your audio and video devices. External serial controller DC OUT (TRIGGER OUT) jacks When a device with DC IN jack is connected, the connected device's power on/standby can be controlled through linked operation to this unit. The DC OUT jack outputs a maximum 12 V/150 mA electrical signal. 12 V/150 mA trigger-compatible device Perform the operation below beforehand. q Turn on the power of this unit. w Turn off the power of this unit from the external controller. e Check that the unit is in the standby mode. in Set as Necessary Set to change the conditions for linked operation via the DC OUT 1 or 2 jack. "Trigger Out 1" or "Trigger Out 2" (vpage 87) NOTE If the permissible trigger input level for the connected device is larger than 12V/150 mA, or has shorted, the DC OUT jack cannot be used. In this case, turn off the power to the unit, and disconnect it. 56