Marantz SR7005 SR7005 User Manual - English - Page 76

ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL Input Setup Setting items Video Mode Make settings for video processing. BD SAT AUX1 DVD VCR GAME z TV z Video Convert The input video signal is converted automatically in conjunction with the connected TV (vpage 14 "Converting input video signals for output (Video conversion function)"). BD SAT AUX1 DVD VCR GAME z TV z i/p Scaler Convert the input source's resolution to the resolution set at "Resolution". BD DVD VCR SAT GAME z AUX1 NET/USB TV z Setting details Auto : Process video automatically based on the HDMI content information. Movie : Process video normally. Game : Always process video appropriate for game content. • If "Video Mode" is set to "Auto", the mode is switched according to the input contents. • If a source is played in both MAIN ZONE (audio and video) and ZONE2 (audio only) modes in the same room, audio in MAIN ZONE and ZONE2 modes may sound out of synchronization, but this is not malfunction. In this case, setting to "Game" mode may improve audio synchronization. ON : The input video signal is converted. OFF : The input video signal is not converted. • When a non-standard video signal from a game machine or some other source is input, the video conversion function might not operate. In this case set "Video Convert" to "OFF". • When "Video Convert" is set to "OFF", the video conversion function does not work. In this case, connect this unit and TV with the same type of cable. Analog : Use i/p scaler function for analog video signal. Analog & HDMI : Use i/p scaler function for analog and HDMI video signal. HDMI : Use i/p scaler function for HDMI video signal. OFF : Do not use i/p scaler function. • "Analog & HDMI" and "HDMI" can be set for input sources for which an HDMI input connector is assigned. • Which items can be set depend on the input source assigned to each input connector. • This function is not effective when the input signal is x.v.Color, 3D, sYCC 601 color, Adobe RGB color, Adobe YCC 601 color or computer resolution. NEDERLANDS SVENSKA Setting items Resolution Set the output resolution. Resolution (Analog) : Analog Video Resolution (HDMI) : HDMI Setting details Auto : The number of pixels the TV connected to the HDMI output connector supports is detected automatically and the appropriate output resolution is set. 480p / 576p / 1080i / 720p / 1080p / 1080p:24Hz : Set the output resolution. BD DVD VCR SAT GAME z AUX1 NET/USB TV z Progressive Mode Set an appropriate progressive conversion mode for the source video signal. • This item can be set when "i/p Scaler" is set to anything other than "OFF". • When "i/p Scaler" is set to "Analog & HDMI", the resolution of both the analog video input signal and HDMI input signal can be set. • To watch 1080p/24Hz pictures, use a TV that supports 1080p/24Hz video signals. • When set to "1080p/24Hz", you can enjoy film-like pictures for film sources (in 24 Hz). For video sources and mixed sources, we recommend setting the resolution to "1080p". • It is not possible to convert a 50 Hz signal into 1080p/24Hz. It is output at a resolution of 1080p/50Hz. Auto : The video signal is automatically detected and the appropriate mode is set. Video1 : Select mode suitable for video playback Video2 : Select mode suitable for video and 30-frame film material playback. BD SAT AUX1 DVD VCR GAME z TV z Aspect Set the aspect ratio for the video signals output to the HDMI. BD DVD VCR SAT GAME z AUX1 NET/USB TV z This item can be set when "i/p Scaler" is set to anything other than "OFF". Full : Output at 16:9 aspect ratio. Normal : Output at 4:3 aspect ratio. "Aspect" can be set when "i/p Scaler" is set to anything other than "OFF". zz "GAME" or "TV" can be set when "HDMI" (vpage 71) or "Component" (vpage 71) has been assigned. 72 Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu