Marantz SR7005 SR7005 User Manual - English - Page 95
Other settings
View all Marantz SR7005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Simple version Other settings SVENSKA NEDERLANDS ESPAÑOL ITALIANO Remote control settings • When you connect a remote control receiver unit (purchased separately) to the REMOTE CONTROL IN terminal of this unit, use the following procedure to disable the remote sensor function of this unit. • The remote sensor function of remote control signals is enabled by default. ON/STANDBY Switches light illumination on/off You can switch the lighting around the main display on or off. • The factory setting is "ON". FRANÇAIS DEUTSCH ENGLISH Basic version Advanced version DISPLAY STATUS ENTER Press and hold DISPLAY on the main unit for 3 seconds. • Carry out the same procedure if you want to change the settings again. nnDisabling the sensor function of the remote control unit When the main unit is in standby mode, press ON/ STANDBY while holding down STATUS and ENTER on the main unit. "Remote Lock:ON" is shown on the display, and the infrared light receiving function is disabled. nnEnabling the remote sensor function When the main unit is in standby mode, press ON/ STANDBY while holding down STATUS and ENTER on the main unit. The infrared light receiving function on the main unit is enabled. NOTE If a remote control receiver unit (purchased separately) is not connected, do not perform this setting. If you do, you will not be able to operate this unit using the remote control unit. 91 Information