Maytag MFI2266AES Service Manual - Page 71

Automatic Ice, Maker, Connecting the Water Supply, Temperature Controls, Temp Alarm, Sabbath Mode,

Get Maytag MFI2266AES PDF manuals and user guides View all Maytag MFI2266AES manuals
Add to My Manuals
Save this manual to your list of manuals

Page 71 highlights

Troubleshooting PROBLEM Ice maker is not producing ice POSSIBLE CAUSES • Ice maker switch is not ON • Household water supply is not reaching water valve. • Copper tubing has kinks. • Water pressure is too low. • Check freezer temperature. • Inner fountain door is blocked or frozen. Temp Alarm Light is flashing All lights on dispenser and interior lights are off and appliance is still running • Exceeded normal operating temperatures. • Control has been set to Sabbath Mode. Door alarm set, no • Alarm mode has been disabled. alarm sounded Temperatures in • Temperature display has been set to display look too low Celsius rather than Fahrenheit. WHAT TO DO • Confirm ice maker switch is ON. See Automatic Ice Maker, pages 12-13. • See Connecting the Water Supply, pages 8-9. • Turn off water supply and remove kinks. If kinks cannot be removed, replace tubing. • Water pressure must be between 35 to 100 pounds per square inch to function properly. A minimum pressure of 35 pounds per square inch is recommended for refigerators with water filters. • See Temperature Controls, pages 10 and 11. Freezer temperature should be between 0° to 2° F (-18° to -17° C) to produce ice. • Do not attempt to free the fountain door by continuously pressing the dispenser button. Contact qualified service technician. • See Temp Alarm, page 11. • See, Sabbath Mode, page 11. • To activate audible alarms, refer to page 11. • See Temperature display on page 10. 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
30
Troubleshooting
Ice maker is not
producing ice
Temp Alarm Light
is flashing
All lights on
dispenser and
interior lights are
off and appliance
is still running
Door alarm set, no
alarm sounded
Temperatures in
display look too low
PROBLEM
POSSIBLE CAUSES
•
Ice maker switch is not ON
•
Household water supply is not
reaching water valve.
•
Copper tubing has kinks.
•
Water pressure is too low.
•
Check freezer temperature.
•
Inner fountain door is blocked or
frozen.
•
Exceeded normal operating
temperatures.
•
Control has been set to Sabbath
Mode.
•
Alarm mode has been disabled.
•
Temperature display has been set to
Celsius rather than Fahrenheit.
•
Confirm ice maker switch is ON. See
Automatic Ice
Maker,
pages 12-13.
• See
Connecting the Water Supply,
pages 8-9.
•
Turn off water supply and remove kinks. If kinks
cannot be removed, replace tubing.
•
Water pressure must be between 35 to 100 pounds
per square inch to function properly. A minimum
pressure of 35 pounds per square inch is
recommended for refigerators with water filters.
• See
Temperature Controls,
pages 10 and 11. Freezer
temperature should be between 0° to 2° F (-18° to
-17° C) to produce ice.
•
Do not
attempt to free the fountain door by
continuously pressing the dispenser button. Contact
qualified service technician.
• See
Temp Alarm,
page 11.
• See,
Sabbath Mode,
page 11.
•
To activate audible alarms, refer to page 11.
• See
Temperature
display on page 10.
WHAT TO DO