Maytag MMMF8030PZ Bump Out Kit Installation Instructions - Page 2
Installation Instructions Requirements
View all Maytag MMMF8030PZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
INSTALLATION INSTRUCTIONS REQUIREMENTS Tools and Parts Tools Needed ■ Measuring tape ■ 3/16" (5 mm), 3/8" (10 mm), 5/8" (16 mm) drill bits ■ Pencil ■ 3/4" (19 mm) hole saw ■ Scissors ■ Keyhole saw ■ Masking tape or thumbtacks ■ Diagonal wire cutting pliers ■ Drill ■ No. 2 Phillips screwdriver ■ Stud finder ■ No. 3 Phillips screwdriver for 1/4 - 20 x 3" (76 mm) bolts Materials Needed ■ 7/16" (11 mm) socket wrench (or box wrench) for 1/4" x 2" (6.4 mm x 51 mm) lag screws ■ 11/2" (38 mm) diameter hole drill bit for wood or metal cabinet ■ Caulking gun and weatherproof caulking compounde ■ Duct tape ■ Standard fittings for wall or roof venting. See the "Venting Design Specifications" section. Parts Needed (Provided in the Microwave Oven) Part Drawing Description Quantity Where can find? 3/16 - 24 x 3" round-head bolts 2 Screw Pack Damper Spacer 2 1/4 - 20 x 3" flat-head bolts 2 Washers 2 A A. Inner Foam in the cavity 3/16" toggle nuts 2 1/4" x 2" lag screws 4 #6 x 3/8" Sheet metal screws 2 Power supply cord bushing 1 Damper for wall or roof venting 1 Spacer (L*W*T: 40*10*1.6 mm) 16 B B. Inside the Literature pack