Maytag MMMF8030PZ Bump Out Kit Installation Instructions - Page 6

Mark Upper Cabinet 1. Using measuring tape, and clearly mark the vertical centerline of the opening. Make sure it is align with the vertical wall centerline. 4. Place and tape the upper cabinet template against the bottom of the upper cabinet. NOTES: ■ Make sure the front edge of the upper cabinet template align with the front edge of upper cabinet. ■ Make sure the center marks on the upper cabinet template align with the upper cabinet centerline which draw in step 1. A B A. Upper Cabinet Centerline B. Wall Centerline C A D B The upper cabinet template is fit for depth of 13" (35 cm) to 16" (40.6 cm) cabinet installation, but need some adjustment for different depth. See the following steps. 2. Using measuring tape, measure the depth of the cabinet. The upper cabinet template is for variable cabinet depth use, find a dimension of your cabinet in below table. Flush Depth (cabinet + door) L 133/4" to 14" (35 cm to 35.6 cm) M 141/4" to 141/2" (36.2 cm to 36.8 cm) N 143/4" to 15" (37.5 cm to 38.1 cm) P 151/4" to 151/2" (38.7 cm to 39.4 cm) R 153/4" to 16" (40 cm to 40.6 cm) Stand-out Depth (cabinet + door) 13" to 133/4" (33 cm to 35 cm) 14" to 141/4" (35.6 cm to 36.2 cm) 141/2" to 143/4" (36.8 cm to 37.5 cm) 15" to 151/4" (38.1 cm to 38.7 cm) 151/2" to 153/4" (39.4 cm to 40 cm) NOTE: There are two install methods, one is flush to the cabinet door, another one is stand-out from the cabinet door. Find the dimension of your cabinet in above table, the dimensions in the left colomn are flush to the cabinet door, the dimensions in the right colomn are stand-out from the cabinet door. Flush to the cabinet door, front allignment installation, follow below steps: 3. For example, the cabinet depth is 14" (35.6 cm), you need to cut or fold the grey portion of the upper cabinet template. A. Front Edge of the Upper Cabinet Template and Front Edge of Upper Cabinet B. Upper Cabinet Centerline C. Arrows on Upper Cabinet Template D. Center Marks on Upper Cabinet Template NOTE: If the upper cabinet doors protrude from the upper cabinet, the template can be adjusted outward to be flush with the upper cabinet door. Cabinet B A 10 15/16 '' (27.7 cm) 11 7/16 '' (29.0 cm) 11 15/16 '' (30.3 cm) 12 7/16 '' (31.5 cm) 12 15/16 '' (32.8 cm) 2 7/8'' (7.2 cm) (Front alignment) (Alineación frontal) (Alignement avant) D (Rear alignment) (Alineación trasera) (Alignement arrière) UPPER CABINET TEMPLATE / PLANTILLA PARA EL GABINETE SUPERIOR / GABARIT POUR PLACARD SUPÉRIEUR D/E: Upper cabinet mounting holes. F: Roof-venting area. G: Power supplier cord hole. D/E: Orificios para el montaje del gabinete superior. F: Zona de ventilación del techo. G: Orificio para el cable de alimentación de energía. D/E : Trous de fixation du coffret supérieur F : Zone d'évacuation du toit G : Trou du cordon d'alimentation. P/N: W11646786A 6 3/8'' (16,2 cm) 2 7/8'' (7.2 cm) (Front alignment) (Alineación frontal) (Alignement avant) E (Rear alignment) (Alineación trasera) (Alignement arrière) G 12 15/16 '' (32.8 cm) 12 7/16 '' (31.5 cm) 11 15/16 '' (30.3 cm) 11 7/16 '' (29.0 cm) 10 15/16 '' (27.7 cm) 12 1/2'' (31,8 cm) 6 1/4'' (15,9 cm) (Rear alignment) (Alineación trasera) (Alignement arrière) 4 3/4'' F (12,1 cm) 8 7/16'' (21.4 cm) 7 15/16'' (20.1 cm) 7 7/16'' (18.9 cm) 6 15/16'' (17.6 cm) 6 7/16'' (16.3 cm) Microwave oven door Bump Out Mounting Plate A. Front Edge of Template B. Upper Cabinet Door Stand-out from the cabinet door, back allignment installation, follow below steps: 5. For example, the cabinet depth is 131/2" (34.2 cm), you need to cut or fold the grey portion of the upper cabinet template. 6