Miele Triflex HX2 Operating instructions/Installation instructions - Page 166

en-US - IMPORTANT SAFETY INSTRUCTIONS  Temporary or permanent operation on an autonomous power supply system or a power supply system that is not synchronized with the grid power supply (e.g., island networks, back-up systems) is possible. A prerequisite for operation is that the power supply system complies with national and local codes. The function and operation of the protective measures provided in the domestic electrical installation and in this Miele product must also be maintained in isolated operation or in operation that is not synchronized with the grid power supply, or these measures must be replaced by equivalent measures in the installation.  Charge and use the battery at an ambient temperature between 32°F and 113°F (0°C and 45°C). Using the battery outside of this ambient temperature range will limit its performance.  Stop using the AP01/AP02/AP03 battery immediately if you notice an unusual smell from it, if liquid is leaking from it, if it is significantly overheating, or if it is discolored or deformed. Dispose of the AP01/AP02/AP03 battery immediately (see safety notice "Disposing of the AP01/AP02/ AP03 battery" at the end of this chapter as well as "Caring for the environment - Disposing of old batteries").  Batteries will deplete over time. They can then leak corrosive fluids. Avoid contact with the eyes and skin. In the event of contact, rinse thoroughly with water and seek medical advice. 166