NEC MT860 User Manual - Page 46

4. Place the white paper for Wall Color Correction over the working area in the Manual Wall Color Correction (Red) screen. Paste the white paper for Wall Color Correction loosely or get someone to hold it. 6. Use the SELECT ̆̄̇̈ button to move the yellow box to select a color density. Moving the yellow box changes the color density of the selected portion in the palette. Move the yellow box so that a color on the white paper for Wall Color Correction becomes close to a color of the projected image on the wall. Position of the white paper for Wall Color Correction NOTE: The size of the above Manual Wall Color Correction screen changes depending on the screen size. 5. Use the SELECT ̇ or ̈ button to move the blue frame to the working area and then press the ENTER button. A yellow box will appear in the palette. * To move the Manual Wall Color Correction (Red) screen, highlight "Move" and then press the ENTER button. * The "Slide Bar" button adjusts Hue, Saturation and Brightness. Yellow box Palette Actual color of the projected image on the wall Color of the projected image on the white paper for Wall Color Correction 7. When you complete the correction, press the ENTER button. The "Next" will be highlighted. 8. Press the ENTER button. The Manual Wall Color Correction (Green) screen will be displayed. 9. Repeat steps 4 to 8. Adjust Red, Green, Blue and White respectively. When you complete correcting White, the Exit Adjustment screen is displayed. Blue frame 10. Highlight the Correction Level bar and then use the SELECT ̇ or ̈ button to finely adjust. 11. Highlight "OK" and press the ENTER button. E-42