NEC MT860 User Manual - Page 52
Setting LAN Mode
![]() |
UPC - 050927239212
View all NEC MT860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Setting LAN Mode This feature allows you to set various setting items when the projector is used on your network. Consult with your network administrator about these settings. NOTE: • A LAN card is required for LAN connection; NEC's optional wireless LAN card is available. For more information on inserting or ejecting a LAN card, see page E-28. • Either PC Card Slots 1 or 2 can accept LAN card. If two LAN cards are inserted into both PC card slots, the first inserted one is effective. DNS Configuration Type in the IP address of DNS server on the network connected to the projector. 12 numeric characters are used. Domain Name Type in domain name of the network connected to the projector. Up to 60 alphanumeric characters can be used. Network Type (required for wireless only) CAUTION: Make sure that the LAN card is removed during Standby mode (NOT Idle mode) or with the main power off. Failure to do so may cause damage to the data on your PC card. Mode: Select communication method when using wireless LAN. IP Address An IP address can be automatically assigned to this projector by your DHCP server. If your network does not automatically assign IP address, ask your network administrator for an address, and then register it manually. Automatic ....... Automatically assigns an IP address to the projector from a DHCP server. Manual Provides a space for you to register the IP address or subnet mask number obtained from your network administrator. IP Address ..... Set your IP address. Press to display the software keyboard and type in 12 numeric characters. Subnet Mask .. Set your subnet mask number. Press to display the software keyboard and type in 12 numeric characters. Projector Name Specify a unique projector name. Press to display the software keyboard and type in. Up to 16 alphanumeric characters can be used. Gateway ......... Set the default gateway of the network connected to the projector. Press to display the software keyboard and type in 12 numeric characters. Checking this box will make the set default route valid. When data is sent from the LAN card, the transfer location will be searched according to the previously set routing information; however, when the transfer location has not been found as a result of the search, the data will be sent to the device that holds the IP address set here. The IP address that is set here must be one that can be identified by a search of the routing information. Infrastructure Select this option when communicating with one or more equipment connected to the wireless or wired LAN network via an access point. 802.11 Ad Hoc Select this option when using the wireless LAN to communicate with a computer in a one-to-one correspondence. This is a method that meets the IEEE802.11 wireless standard. Ad Hoc Select this option when using the wireless LAN to communicate with a computer in a one-to-one correspondence. Easy Connection .......... This allows you to easily set up wireless LAN connection. See the supplied Software Utility Installation Guide for more information. SSID (Network name): Enter an identifier (SSID) for wireless LAN. Communication can be done only with equipment whose SSID matches SSID for your wireless LAN. Up to 16 alphanumeric characters can be used (Casesensitive). NOTE: To disable SSID, select a space (null) or "ANY"(All caps). Channel: Set this option when selecting [802.11 Ad Hoc] or [Ad Hoc] in [Mode]. Select a channel number from the pull-down list. The channel must match for all wireless devices communicating on your wireless LAN. NOTE: Channels in the pull-down list are different depending on which country you live in. TX rate: Select a wireless transmission speed. Normally leave it as Automatic. Try another transmission speed when the connection fails. E-48
![](/manual_guide/products/nec-mt1060-user-manual-c6d628a/52.png)