NEC NP-PX2201UL User Manual - Page 106
Screen Trigger Stereo mini
![]() |
View all NEC NP-PX2201UL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
7. Appendix Screen Trigger (Stereo mini) When the projector is powered ON the screen trigger output sends a low voltage trigger to the screen controller and the screen will go down. When the projector is powered OFF the screen trigger stops sending a low voltage trigger to the screen controller and the screen will go up. NOTE: • To use this feature, you must turn on the [TRIGGER-1/2] function. See "TRIGGER-1/2" on page 69 for more information. Stereo mini cable (not supplied) Tip (12 V) Ring (0 V) Sleave (ground 0 V) NOTE: • Screen controllers are supplied and supported by screen manufacturers. NOTE: • Do not use these terminals for anything other than intended use. Connecting the wired remote control to the TRIGGER 1/2 terminals causes damage to the remote control. 86
![](/manual_guide/products/nec-nppx2201ul-user-manual-30e31ce/106.png)