Home » NEC Manuals » Projectors » NEC NP-PX2201UL » Manual Viewer

NEC NP-PX2201UL User Manual - Page 15

Radiation Zone HD: Hazard Distance, RG3 of IEC/EN 62471-5 First edition 2015.

Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Radiation Zone (HD: Hazard Distance) Important Information • The below table describes the radiation range of emitted light by the projector that is classified as Risk Group 3 (RG3) of IEC/EN 62471-5 First edition 2015. • Please keep within bounds for installing the projector. Install a barrier for preventing human eyes from entering the RG3 zone. For the barrier installation position, keep horizontal safety zone over 1 m (2.5 m for USA) from the RG3 zone. In case to install the projector over head, keep over 3 m distance at least between the floor surface and the RG3 zone. This projector must be installed at a height that will prevent your eyes from being exposed within the RG3 zone. The equipment administrator (operator) must control the entry of viewers into the RG3 zone. Lens NP45ZL NP46ZL NP47ZL NP48ZL NP49ZL Wide Tele Wide Tele Wide Tele Wide Tele Wide Tele RG3 HD (m) 1.0 1.0 1.5 1.8 1.8 2.4 2.4 3.0 4.2 4.8 Screen size (m) H V 1.11 0.69 0.83 0.52 1.25 0.78 1.15 0.72 1.20 0.75 1.20 0.75 1.20 0.75 0.75 0.47 1.05 0.66 0.69 0.43 The drawings below are example of typical installation methods. Besides these, when installing the projector at an angle, a security zone is required in the same way. When installed on a floor or a desktop Horizontal security zone: over 1 m (2.5 m for USA) H [Plan view] RG3 zone Horizontal security zone: over 1 m (2.5 m for USA) When installed on a ceiling HD V floor [Side view] RG3 zone Vertical security zone: over 3 m * If lens shift is utilized, please consider the shift of projected image according to the volume of lens shift. xiv

Section	Page
Front cover	1
Table of Contents	2
Important Information	6
1. Introduction	21
1-1. Introduction to the Projector	21
1-2. What’s in the Box?	24
1-3. Part Names of the Projector	25
1-4. Part Names of the Remote Control	29
Battery Installation	30
Remote Control Precautions	30
2. Projecting an Image (Basic Operation)	32
2-1. Flow of Projecting an Image	32
2-2. Connecting Your Computer/Connecting the Power Cord	33
2-3. Turning on the Projector	35
2-4. Selecting a Source	38
Using the Direct button on the remote control	38
Using the INPUT button on the projector cabinet	39
Select by displaying the On-Screen Menu	39
2-5. Adjusting the Picture Size and Position	40
Adjusting the vertical position of a projected image (Lens shift)	41
Adjusting the focus and zoom of the projected image	43
Adjusting the Tilt Foot	48
2-6. Turning off the Projector	49
3. Convenient Features	50
3-1. Turn off the light of the projector (LENS SHUTTER)	50
3-2. Turning Off the On-Screen Menu (On-Screen Mute)	50
3-3. Shift the On-Screen Menu displaying position	51
3-4. Magnifying a Picture	52
3-5. Adjustment of luminance (brightness) and energy-saving effect [LIGHT MODE]	53
3-6. Correcting Horizontal and Vertical Keystone Distortion [KEYSTONE]	54
3-7. Controlling the Projector by Using an HTTP Browser	55
3-8. Storing Changes for Lens Shift [LENS MEMORY]	57
3-9. Adjust boundaries of a projected image [EDGE BLENDING]	58
4. Using On-Screen Menu	64
4-1. Basic operations of the on-screen menu	64
4-1-1. Configuration of the on-screen menu screen	64
4-1-2. Adjustment bar	65
4-1-3. Confirmation message	65
4-1-4. Changing the number	65
4-2. List of Menu Items	66
4-3. INPUT	69
4-3-1. INPUT SELECTION	69
4-3-2. AUTO SOURCE	69
4-3-3. COLOR SPACE	69
4-3-4. ASPECT RATIO	70
4-3-5. OVERSCAN	71
4-3-6. IMAGE OPTIONS	71
4-3-7. TEST PATTERN	71
4-3-8. 3D	72
4-3-9. AUTO ADJUST	73
4-4. PICTURE	74
4-4-1. PRESET	74
4-4-2. CONTRAST/BRIGHTNESS/SHARPNESS/COLOR/HUE	74
4-4-3. COLOR TEMPERATURE	74
4-4-4. COLOR GAMUT	74
4-4-5. GAMMA CORRECTION	74
4-4-6. WHITE BALANCE	75
4-4-7. COLOR CORRECTION	75
4-4-8. NOISE REDUCTION	76
4-4-9. DYNAMIC CONTRAST	76
4-4-10. LIGHT OFF TIMER	76
4-5. DISPLAY	77
4-5-1. LENS LOCK	77
4-5-2. LENS CONTROL	77
4-5-3. LENS MEMORY	77
4-5-4. CENTER LENS	77
4-5-5. DIGITAL ZOOM	78
4-5-6. GEOMETRIC CORRECTION	78
4-5-7. BLANKING	82
4-5-8. EDGE BLENDING	82
4-5-9. SCREEN TYPE	82
4-6. SETUP	83
4-6-1. LANGUAGE	83
4-6-2. ORIENTATION	83
4-6-3. FAN MODE	84
4-6-4. AUTO POWER OFF	84
4-6-5. DIRECT POWER ON	84
4-6-6. NETWORK SETTINGS	85
4-6-7. LIGHT MODE	86
4-6-8. LIGHT ADJUST (LIGHT MODE)	86
4-6-9. CONSTANT BRIGHTNESS (LIGHT MODE)	86
4-6-10. BACKGROUND	86
4-6-11. STARTUP LOGO	87
4-6-12. REMOTE CONTROL	87
4-6-13. TRIGGER-1/2	89
4-6-14. MENU	89
4-7. INFO. And RESET ALL	90
4-7-1. INFO.	90
4-7-2. RESET ALL	90
5. Installation and Connections	91
5-1. Connecting to Other Equipment	91
6. Maintenance	93
6-1. Cleaning the Lens	93
6-2. Cleaning the Cabinet	93
7. Appendix	94
7-1. Throw distance and screen size	94
7-2. Compatible Input Signal List	98
7-3. Specifications	100
7-4. Cabinet Dimensions	103
7-5. Pin assignments and signal names of main terminals	104
7-6. Troubleshooting	107
7-7. Feature of each indicator	109
7-8. PC Control Codes and Cable Connection	111