Home » NEC Manuals » Projectors » NEC NP-PX2201UL » Manual Viewer

NEC NP-PX2201UL User Manual - Page 82

Blanking, 4-5-8. Edge Blending, 4-5-9. Screen Type

Add to My Manuals
Save this manual to your list of manuals

Page 82 highlights

4. Using On-Screen Menu PC TOOL Recall the geometric correction data that is registered in the projector beforehand. Three types of correction data can be registered. 4-5-7. BLANKING Adjusts the display range (BLANKING) of the top, bottom, left, and right edges of the video signal. 4-5-8. EDGE BLENDING Adjust the edges (boundaries) of the projection screen when projecting high-resolution images by combining multiple projectors on the left, right, top and bottom. MODE MARKER RANGE BLACK LEVEL RESET Enables/disables the edge blending function. Set whether to display the markers when adjusting the range and display position. When this is turned on, when the white level is increased from [0], a green marker is displayed for range adjustment and a red marker is displayed for display position adjustment. Adjusts the edge blending range (width). Adjusts the black level of non-overlapping images on the multiple screens. Returns the edge blending adjustment value to the factory setting. Example of a screen that is projected by arranging the images of 4 projectors with 2 units each vertically and horizontally. Projected area Projected area Projected area Edge Blending area Projected area 4-5-9. SCREEN TYPE Set the ratio of the screen to project. Select from 16:10, 16:9 or 4:3. 62

Section	Page
Front cover	1
Table of Contents	2
Important Information	6
1. Introduction	21
1-1. Introduction to the Projector	21
1-2. What’s in the Box?	24
1-3. Part Names of the Projector	25
1-4. Part Names of the Remote Control	29
Battery Installation	30
Remote Control Precautions	30
2. Projecting an Image (Basic Operation)	32
2-1. Flow of Projecting an Image	32
2-2. Connecting Your Computer/Connecting the Power Cord	33
2-3. Turning on the Projector	35
2-4. Selecting a Source	38
Using the Direct button on the remote control	38
Using the INPUT button on the projector cabinet	39
Select by displaying the On-Screen Menu	39
2-5. Adjusting the Picture Size and Position	40
Adjusting the vertical position of a projected image (Lens shift)	41
Adjusting the focus and zoom of the projected image	43
Adjusting the Tilt Foot	48
2-6. Turning off the Projector	49
3. Convenient Features	50
3-1. Turn off the light of the projector (LENS SHUTTER)	50
3-2. Turning Off the On-Screen Menu (On-Screen Mute)	50
3-3. Shift the On-Screen Menu displaying position	51
3-4. Magnifying a Picture	52
3-5. Adjustment of luminance (brightness) and energy-saving effect [LIGHT MODE]	53
3-6. Correcting Horizontal and Vertical Keystone Distortion [KEYSTONE]	54
3-7. Controlling the Projector by Using an HTTP Browser	55
3-8. Storing Changes for Lens Shift [LENS MEMORY]	57
3-9. Adjust boundaries of a projected image [EDGE BLENDING]	58
4. Using On-Screen Menu	64
4-1. Basic operations of the on-screen menu	64
4-1-1. Configuration of the on-screen menu screen	64
4-1-2. Adjustment bar	65
4-1-3. Confirmation message	65
4-1-4. Changing the number	65
4-2. List of Menu Items	66
4-3. INPUT	69
4-3-1. INPUT SELECTION	69
4-3-2. AUTO SOURCE	69
4-3-3. COLOR SPACE	69
4-3-4. ASPECT RATIO	70
4-3-5. OVERSCAN	71
4-3-6. IMAGE OPTIONS	71
4-3-7. TEST PATTERN	71
4-3-8. 3D	72
4-3-9. AUTO ADJUST	73
4-4. PICTURE	74
4-4-1. PRESET	74
4-4-2. CONTRAST/BRIGHTNESS/SHARPNESS/COLOR/HUE	74
4-4-3. COLOR TEMPERATURE	74
4-4-4. COLOR GAMUT	74
4-4-5. GAMMA CORRECTION	74
4-4-6. WHITE BALANCE	75
4-4-7. COLOR CORRECTION	75
4-4-8. NOISE REDUCTION	76
4-4-9. DYNAMIC CONTRAST	76
4-4-10. LIGHT OFF TIMER	76
4-5. DISPLAY	77
4-5-1. LENS LOCK	77
4-5-2. LENS CONTROL	77
4-5-3. LENS MEMORY	77
4-5-4. CENTER LENS	77
4-5-5. DIGITAL ZOOM	78
4-5-6. GEOMETRIC CORRECTION	78
4-5-7. BLANKING	82
4-5-8. EDGE BLENDING	82
4-5-9. SCREEN TYPE	82
4-6. SETUP	83
4-6-1. LANGUAGE	83
4-6-2. ORIENTATION	83
4-6-3. FAN MODE	84
4-6-4. AUTO POWER OFF	84
4-6-5. DIRECT POWER ON	84
4-6-6. NETWORK SETTINGS	85
4-6-7. LIGHT MODE	86
4-6-8. LIGHT ADJUST (LIGHT MODE)	86
4-6-9. CONSTANT BRIGHTNESS (LIGHT MODE)	86
4-6-10. BACKGROUND	86
4-6-11. STARTUP LOGO	87
4-6-12. REMOTE CONTROL	87
4-6-13. TRIGGER-1/2	89
4-6-14. MENU	89
4-7. INFO. And RESET ALL	90
4-7-1. INFO.	90
4-7-2. RESET ALL	90
5. Installation and Connections	91
5-1. Connecting to Other Equipment	91
6. Maintenance	93
6-1. Cleaning the Lens	93
6-2. Cleaning the Cabinet	93
7. Appendix	94
7-1. Throw distance and screen size	94
7-2. Compatible Input Signal List	98
7-3. Specifications	100
7-4. Cabinet Dimensions	103
7-5. Pin assignments and signal names of main terminals	104
7-6. Troubleshooting	107
7-7. Feature of each indicator	109
7-8. PC Control Codes and Cable Connection	111

Match case Limit results 1 per page

4. Using On-Screen Menu

PC TOOL

Recall the geometric correction data that is registered in the projector beforehand.

Three types of correction data can be registered.

4-5-7. BLANKING

Adjusts the display range (BLANKING) of the top, bottom, left, and right edges of the video signal.

4-5-8. EDGE BLENDING

Adjust the edges (boundaries) of the projection screen when projecting high-resolution images by combining multiple

projectors on the left, right, top and bottom.

MODE

Enables/disables the edge blending function.

MARKER

Set whether to display the markers when adjusting the range and display position.

When this is turned on, when the white level is increased from [0], a green marker is displayed

for range adjustment and a red marker is displayed for display position adjustment.

RANGE

Adjusts the edge blending range (width).

BLACK LEVEL

Adjusts the black level of non-overlapping images on the multiple screens.

RESET

Returns the edge blending adjustment value to the factory setting.

Example of a screen that is projected by arranging the images of 4 projectors with 2 units each vertically and horizontally.

Edge Blending area

Projected area

4-5-9. SCREEN TYPE

Set the ratio of the screen to project.

Select from 16:10, 16:9 or 4:3.