NEC NP-VE281 Users Manual - Page 38
(4) Changing Eco Mode, Press the ECO button on the remote control to display [ECO MODE], screen.
View all NEC NP-VE281 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
4. Convenient Features Changing Eco Mode This feature enables you to select two brightness modes of the lamp: OFF and ON modes. The lamp life can be extended by turning on the [ECO MODE]. [ECO MODE] [OFF] Description This is the default setting (100% Brightness). Status of LAMP indicator Off [ON] Select this mode to increase the lamp life (approx. Steady Green light 80% Brightness.) LAMP STATUS LAMP STATUS To turn on the [ECO MODE], do the following: 1. Press the ECO button on the remote control to display [ECO MODE] screen. 2. Use the or button to select [ON]. 3. Press the ENTER button. To change from [ON] to [OFF], Go back to Step 2 and select [OFF]. Repeat Step 3. NOTE: • The [ECO MODE] can be changed by using the menu. Select [SETUP] → [GENERAL] → [ECO MODE]. • The lamp life remaining and lamp hours used can be checked in [USAGE TIME]. Select [INFO.] →[USAGE TIME]. • The projector will always enter into the [ECO MODE] [ON] condition for 90 seconds immediately after the projector is turned on. The lamp condition will not be affected even when [ECO MODE] is changed within this time period. • After a lapse of 45 seconds from when the projector displays a blue, black or logo screen, [ECO MODE] will automatically switch to [ON]. This is done only when [ECO MODE] is set to [OFF]. • If the projector is overheated in [OFF] mode, there may be a case where the [ECO MODE] automatically changes to [ON] mode to protect the projector. When the projector is in [ON] mode, the picture brightness decreases. When the projector comes back to normal temperature, the [ECO MODE] returns to [OFF] mode. 29