NEC NP-VE281 Users Manual - Page 66
OPTIONS1], Selecting Fan Mode [FAN MODE], Selecting [COLOR SYSTEM], VE281X/VE281/VE282X/VE282]
View all NEC NP-VE281 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
[OPTIONS(1)] [VE280X/VE280] [VE281X/VE281/VE282X/VE282] 5. Using On-Screen Menu Selecting Fan Mode [FAN MODE] This option allows you to select three modes for fan speed: Auto mode, High speed mode, and High Altitude mode. AUTO The built-in fans automatically run at a variable speed according to the internal temperature. HIGH The built-in fans run at high speed. HIGH ALTITUDE The built-in fans run at a high speed. Select this option when using the projector at altitudes approximately 1200 meters/ 4000 feet or higher. NOTE: • When you wish to cool down the temperature inside the projector quickly, select [HIGH]. • It is recommended that you select High speed mode if you use the projector non-stop for consecutive days. • If you use the projector at altitudes approximately 1200 meters/4000 feet or higher, you are recommended to set [FAN MODE] to [HIGH ALTITUDE]. Failure to do so may cause the projector to overheat , resulting in malfunction. High altitude 3700 m (12000 ft) to 3000 m (10000 ft) 3000 m (10000 ft) to 2600 m (8500 ft) 2600 m (8500 ft) to 1200 m (4000 ft) 1200 m (4000 ft) to 0 [HIGH ALTITUDE] for [FAN MODE] 5° to 35°C (ECO MODE ON ONLY) [HIGH ALTITUDE] for [FAN MODE] 5° to 40°C (ECO MODE ON ONLY) [HIGH ALTITUDE] for [FAN MODE] 5° to 40°C [AUTO] for [FAN MODE] 5° to 40°C • Using the projector at altitudes approximately 1200 meters/4000 feet or higher without setting to [HIGH ALTITUDE] can cause the projector to overheat and the protector could shut down. If this happens, wait a couple minutes and turn on the projector. • Using the projector at altitudes less than approximately 1200 meters/4000 feet and setting to [HIGH ALTITUDE] can cause the lamp to overcool, causing the image to flicker. Switch [FAN MODE] to [AUTO]. • Using the projector at high altitudes or in low air pressure can shorten the life of components. • Your setting will not be affected even when [RESET] is done from the menu. Selecting [COLOR SYSTEM] This feature enables you to select video standards manually. Normally select [AUTO]. Select the video standard from the pulldown menu. 57