NEC PX-50XM5A 42XM4/50XM5/61XM4 UM - Page 15
Wide Screen Operation with, Computer Signals - resolution
View all NEC PX-50XM5A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Wide Screen Operation with Computer Signals Switch to the wide screen mode to expand the 4 : 3 image to fill the entire screen. 1. Press the WIDE button on the remote control. 2. Within 3 seconds ... Press the WIDE button again. The screen size switches as follows: → NORMAL → FULL → ZOOM When displaying enhanced split screen: NORMAL ↔ FULL NORMAL size screen (4:3 or SXGA 5:4) FULL size screen The image is expanded in the horizontal and vertical direction. ZOOM size screen When wide signals are input. TRUE The picture has the same size as the normal computer image. FULL size screen The image is expanded in the horizontal direction. ZOOM size screen The image is true resolution. FULL When wide signals are input. FULL size screen When "PICTURE SIZE" is set to "OFF" * This cannot be set in some models. "TRUE" size will not be displayed in such cases. The screen size switches as follows: → TRUE → FULL → ZOOM TRUE size screen (VGA, SVGA 4:3) The image is true resolution. Information Ⅵ Supported resolution See page En-40 for details on the display output of the various VESA signal standards supported by the monitor. Ⅵ "PICTURE SIZE" setting When the setting of "PICTURE SIZE" is OFF, the size of RGB-input pictures will be TRUE in place of NORMAL. Ⅵ When 852 (848) dot ן480 line wide VGA* signals with a vertical frequency of 60 Hz and horizontal frequency of 31.7 (31.0) kHz are input Select an appropriate setting for RGB SELECT mode referring to the"Table of Signals Supported" on page En-40. * "VGA", "SVGA" and "SXGA" are registered trademarks of IBM, Inc. of the United States. Note: Do not allow 4:3 content to be displayed for extended periods of time without using gray bars. This can cause image retention. En-14