NEC PX-50XM5A 42XM4/50XM5/61XM4 UM - Page 36

BTM LFT~TOP LFT: Will show the entire image on the sub screen of picture-in-picture mode. Side-by-Side Picture-in-Picture RGB/PC1 RGB/PC1 POINTER button or Zoom+/- button Side-by-Side RGB/PC1 Picture-in-Picture RGB/PC1 SELECT/ FREEZE button S BY S1 RGB/PC1 RGB/PC1 RGB/PC1 SELECT/ FREEZE button RGB/PC1 POINTER button or S BY S2 RGB/PC1 RGB/PC1 Displaying still images in the sub screen This feature enables display in the sub screen of still images captured by pressing the SELECT/FREEZE button. Example: Setting "PIC FREEZE" to "BTM LFT" On "PIC FREEZE" of "OPTION4" menu, select "BTM LFT". OPTION 4 PREVIOUS PAGE SUB. PICTURE ZOOM NAV : BTM LFT PIC FREEZE : BTM LFT SEAMLESS SW : OFF SELECT1 : - SELECT2 : - TEXT INSERT : OFF SEL. ADJ. EXIT RETURN 4 / 4 Information Ⅵ PIC FREEZE Function * This feature does not function during split screen mode. * Digital zoom is not available while this function is operating. * A further press of the SELECT/FREEZE button while this function is operating will cancel this function. * Providing a 2-screen display will cancel this function. Ⅵ PIC FREEZE settings OFF: Will not show the still image. S BY S1, 2: The still images captured by pressing the SELECT/FREEZE button will be shown on the sub screen of side-by-side mode. BTM LFT~TOP LFT: The still images captured by pressing the SELECT/FREEZE button will be shown on the sub screen of picture-in-picture mode. Switching the input source quickly This feature enables quick input selection. After setting ON, press the CLEAR/SEAMLESS SW button for quick switching between the two selected input signals. Example: Set to switch quickly between RGB1 and RGB2. On "SEAMLESS SW" of "OPTION4" menu, select "ON". Select "RGB1" and "RGB2". OPTION 4 PREVIOUS PAGE SUB. PICTURE ZOOM NAV : BTM LFT PIC FREEZE : S BY S1 SEAMLESS SW : ON SELECT1 : RGB1 SELECT2 : RGB2 TEXT INSERT : OFF SEL. ADJ. EXIT RETURN 4 / 4 * The available sources depend on the setting of input. Information Ⅵ SEAMLESS SW Function * This feature will not function for certain input combinations. See the table on page En-15. * After switching to the selected input, please operate this function. * This feature will not function during split screen mode. * When SEAMLESS SW is first turned on, or when signals being transmitted are changed, there may be a slight delay due to signal analysis. Ⅵ SEAMLESS SW settings OFF: Turns off the SEAMLESS SW function. ON: When the CLEAR/SEAMLESS SW button is pressed, input signals will switch quickly according to the setting of SELECT1 and SELECT2. En-35