NEC PX-50XM5A 42XM4/50XM5/61XM4 UM - Page 8

Caution when placing the plasma monitor in portrait mode Top side • Use the optional unit. Contact your store of purchase when installing. • Rotate 90° clockwise as seen from the front when installing. • After installing, make sure the NEC logo is located at the left hand side of the screen when facing the plasma from the front. • Be sure to set "OSM ANGLE" to "V" when using. * Failure to heed the above cautions may lead to malfunction. 90° / EXIT RIGHT/ + LEFT/ - UP DOWN MENU/ ENTER INPUT SELECT VOLUME OPTION1 OSM BNC INPUT : RGB D-SUB INPUT : RGB RGB SELECT : AUTO HD SELECT : 1080B INPUT SKIP : OFF ALL RESET : OFF 1024‫؂‬768 SEL. MENU/ENTER OK EXIT RETURN Using the remote control Battery Installation and Replacement Insert the 2 "AAA" batteries, making sure to set them in with the proper polarity. 1.Press and open the cover. 2. Align the batteries according to the (+) and (-) indication inside the case. MENU/ ENTER VOLUME DOWN UP LEFT/ - INPUT SELECT RIGHT/ + / EXIT Bottom side Operating Range * Use the remote control within a distance of about 7 m/ 23ft. from the front of the monitor's remote control sensor and at horizontal and vertical angles of up to approximately 30°. * The remote control operation may not function if the monitor's remote control sensor is exposed to direct sunlight or strong artificial light, or if there is an obstacle between the sensor and the remote control. 3.Replace the cover. Approx. 7m / 23ft REMOTE External Control OUT IN Using the wired remote control mode Connect the remote cable* to the remote control's remote jack and the "REMOTE IN" terminal on the monitor. When the cable is connected, the mode automatically switches to wired remote control. When the wired remote control mode is used, the remote control can be operated even if no batteries are loaded. Remote Control Cable* To Remote Jack Handling the remote control • Do not drop or mishandle the remote control. • Do not get the remote control wet. If the remote control gets wet, wipe it dry immediately. • Avoid heat and humidity. • When not using the remote control for a long period, remove the batteries. • Do not use new and old batteries together, or use different types together. • Do not take apart the batteries, heat them, or throw them into a fire. • When using the remote control in the wireless condition, be sure to unplug the remote cable from the REMOTE IN terminal on the monitor. * The 1/8 Stereo Mini cable must be purchased separately. En-7