Netgear AC2000 User Manual - Page 15
Cable Your Router
View all Netgear AC2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
AC2000 Smart WiFi Router Cable Your Router The following image shows how to cable your router: Figure 4. Router cabling To cable your router: 1. Unplug your modem's power, leaving the modem connected to the wall jack for your Internet service. If your modem uses a battery backup, remove the battery. 2. Plug in and turn on your modem. If your modem uses a battery backup, put the battery back in. 3. Connect your modem to the Internet port of your router with the yellow Ethernet cable that came with your router. 4. Connect the power adapter to your router and plug the power adapter into an outlet. 5. Press the Power On/Off button on the back panel of the router. Hardware overview and setup 15 User Manual
Cable Your Router
The following image shows how to cable your router:
Figure 4. Router cabling
To cable your router:
1.
Unplug your modem’s power, leaving the modem connected to the wall jack for
your Internet service.
If your modem uses a battery backup, remove the battery.
2.
Plug in and turn on your modem.
If your modem uses a battery backup, put the battery back in.
3.
Connect your modem to the Internet port of your router with the yellow Ethernet
cable that came with your router.
4.
Connect the power adapter to your router and plug the power adapter into an outlet.
5.
Press the
Power On/Off
button on the back panel of the router.
User Manual
15
Hardware overview and setup
AC2000 Smart WiFi Router