Netgear C6220 User Manual - Page 23
Specify an IPv6 Internet Connection, Get Automatically from ISP, Use These DNS Servers, Apply, admin
View all Netgear C6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
AC1200 WiFi Cable Modem Router Model C6220 8. Select a Domain Name Server (DNS) Address radio button: • Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your ISP automatically assigns this address. • Use These DNS Servers. If you know that your ISP requires specific servers, select this option. Enter the IP address of your ISP's primary DNS server. If a secondary DNS server address is available, enter it also. 9. Click the Apply button. Your settings are saved. Note: If you get address not found errors when you go to a website, it is likely that your DNS servers are not set up correctly. Contact your ISP to get the DNS server addresses. Specify an IPv6 Internet Connection To specify an IPv6 Internet connection: 1. Launch a web browser from a WiFi-enabled computer or mobile device that is connected to the network. 2. Type http://routerlogin.net or http://192.168.0.1. A login window opens. 3. Enter the modem router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Setup > IPV6. If your Internet provider supports IPv6, the System Delegated Prefix field displays IPv6 information. Specify Initial Settings 23