Netgear DG834Gv5 DG834Gv5 Reference Manual - Page 121
ping -t 192.168.3.1, Gateway-to-gateway configuration
View all Netgear DG834Gv5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Wireless ADSL2+ Modem Router DG834G User Manual c. Type ping -t 192.168.3.1, and then click OK. Running a ping test to the LAN from the PC Figure 6-31 This causes a continuous ping to be sent to the first DG834Gv5. Within two minutes, the ping response should change from timed out to reply. Note: You can use Ctrl-C to stop the pinging. Figure 6-32 Once the connection is established, you can open a browser on the PC and enter the LAN IP address of the remote DG834Gv5. After a short wait, you should see the login screen of the modem router (unless another PC already has the DG834Gv5 management interface open). • Gateway-to-gateway configuration. Test the VPN tunnel by pinging the remote network from a PC attached to the DG834Gv5. a. Open a command prompt (for example, Start > Run > cmd). Virtual Private Networking v1.0, May 2008 6-27