Netgear DGN2000 DGN2000 Reference Manual - Page 25
ADSL Settings, Multiplexing Method, LLC-based, Apply - dropping
UPC - 606449058727
View all Netgear DGN2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
ADSL Settings Wireless-N ADSL2+ Modem Router DGN2000 Reference Manual Note: For information about how to install ADSL filters, see the Wireless-N ADSL2+ Modem Router DGN2000 Setup Manual. The default ADSL settings of your modem router work fine for most ISPs. However, some ISPs use a specific multiplexing method and virtual circuit number for the virtual path identifier (VPI) and virtual channel identifier (VCI). Note: You must use the Setup Wizard to select the correct country for the default ADSL settings to work. If your ISP provided you with a multiplexing method or VPI/VCI number, then enter the setting: 1. From the main menu, select ADSL Settings.The ADSL Settings screen displays. Figure 1-5 2. In the Multiplexing Method drop-down list, select LLC-based or VC-based. 3. For the VPI, type a number between 0 and 255. The default is 8. 4. For the VCI, type a number between 32 and 65535. The default is 35. 5. Click Apply. Connecting Your Router to the Internet v1.0, July 2008 1-11