Netgear DGN2000 DGN2000 Reference Manual - Page 34
Table 2-1., Wireless Settings continued - speed
UPC - 606449058727
View all Netgear DGN2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Wireless-N ADSL2+ Modem Router DGN2000 Reference Manual Table 2-1. Wireless Settings (continued) Settings Description Wireless Network (continued) Mode • Up to 270Mbps means that all 802.11g, 802.11b, and Note: The mode can be set faster Draft-N wireless stations can be used. This mode only for the primary wireless expands the channel bandwidth from 20 MHz to 40 MHz LAN (NETGEAR). to achieve the 270 Mbps rate. The router selects channel expansion on a frame-by-frame basis to avoid interference with the data transmissions of other access points or wireless stations. Up to 270Mbps mode uses two channels, but in this mode only the first channel is listed in the channel pulldown menu. The associated channels in this mode are: 1+5, 2+6, 3+7, 4+8, 5+9, 6+10, and 7+11. Up to 270Mbps mode is the fastest mode and is compatible with older wireless stations. • Up to 130Mbps allows wireless stations that support speeds up to 130 Mbps. In this case, the router transmits two streams with different data concurrently on the same channel. This mode restricts channel bandwidth to minimize interference with the data transmissions of other access points and wireless stations. It is the default setting. • g & b allows older 802.11g and 802.11b wireless stations to access this device. You might want to select this mode if you have a wireless station that is using WEP security and does not support WPA-PSK or WPA2-PSK. • g only allows only 802.11g wireless stations to access this device. • b only allows only 802.11b wireless stations to access this device. However, note that in b only mode, 802.11g wireless stations can connect if they can operate in 802.11b mode. Wireless Access Enable Point Selected by default, this setting enables the wireless radio, which allows the modem router to work as a wireless access point. Turning off the wireless radio can be helpful for configuration, network tuning, or troubleshooting. The Wireless LED on the front of the modem router displays the current status of the wireless access point to let you know if it is disabled or enabled. The wireless access point must be enabled to allow wireless stations to access the Internet. 2-8 Configuring Your Wireless Network and Security Settings v1.0, July 2008