Netgear DGN2000 DGN2000 Reference Manual - Page 38
admin, password, Setup, Access List, Turn Access Control On, by their MAC addresses. - admin password
UPC - 606449058727
View all Netgear DGN2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Wireless-N ADSL2+ Modem Router DGN2000 Reference Manual unwanted access to your network, but the data broadcast over the wireless link is fully exposed.The Wireless Station Access list determines which wireless hardware devices will be allowed to connect to the modem router. To restrict access based on MAC addresses: 1. Log in to the modem router at its default LAN address of http://192.168.0.1 with its default user name of admin and default password of password, or using whatever LAN address and password you have set up. Note: If you configure the modem router from a wireless computer, add your computer's MAC address to the access list. Otherwise you will lose your wireless connection when you click Apply. You must then access the modem router from a wired computer, or from a wireless computer that is on the access control list, to make any further changes. 2. In the Wireless Settings screen, under the Wireless Station Access List section, click the Setup Access List button to display the list. Figure 2-3 3. Select the Turn Access Control On check box to enable the restricting of wireless computers by their MAC addresses. 2-12 Configuring Your Wireless Network and Security Settings v1.0, July 2008