Netgear GS108T GS108T Setup Manual - Page 100
Factory Reset, Software Image, Boot Code, Load Flash, Apply - reset factory defaults
![]() |
UPC - 606449051377
View all Netgear GS108T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
GS108T Smart Switch Software Administration Manual c. Select either Software Image or Boot Code for saving the firmware in the destination file. If the HTTP mode is selected: a. Enter the name of the firmware or configuration file to download. b. Select either Software Image or Load Flash for saving the firmware in the destination file. 4. Click Apply to start the download. Factory Reset Factory Reset enables you reset the switch to its factory default values. . Note: You can also use the Factory Defaults button on the front panel to reset the switch to its factory default values. 1. Click Factory Reset in the blue navigation panel. A screen similar to that shown below appears. . Figure 5-61 5-4 Managing Firmware and Reset Options v1.0, May 2007
![](/manual_guide/products/netgear-gs108t-gs108t-setup-manual-1-18acb17/100.png)