Netgear GS108T GS108T Setup Manual - Page 54
Server IP, UDP Port, Facility, Description, Minimum Severity, Apply, Emergency, Alert, Critical, Error
![]() |
UPC - 606449051377
View all Netgear GS108T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
GS108T Smart Switch Software Administration Manual . Figure 3-23 b. Input the required information in the provided fields: • Server IP: Input a valid IP Address for the remote server. • UDP Port: Input the UDP port number to connect with the server. • Facility: Input the type of facility. Select any one from the given eight facility types. • Description: Give the description of server log (limit is 256 characters). • Minimum Severity: Select the desired log level from the given eight log levels (e.g., Emergency, Alert, Critical, Error, Warning, Notice, Informational, or Debug). c. Click Apply to add the server log. Removing a server log from the Server Logs list a. Check the server logs on the Server Logs page that need to be removed. b. Click Apply to remove the server logs. 3-30 v1.0, May 2007 Managing System Settings
![](/manual_guide/products/netgear-gs108t-gs108t-setup-manual-1-18acb17/54.png)