Netgear GS108T GS108T Setup Manual - Page 80
Spanning Tree, RSTP Switch Setting, Designated Root Bridge, Priority, Max Age
UPC - 606449051377
View all Netgear GS108T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
GS108T Smart Switch Software Administration Manual 1. Click Spanning Tree in the blue navigation panel. A screen similar to that shown below appears. . Figure 4-46 2. View and change the spanning tree settings as desired: • BPDU: When Spanning tree is disabled, BPDU flooding is a configurable option. If BPDU flooding is enabled, the BPDU will be forwarded to all the linkup ports • RSTP Switch Setting: The RSTP switch settings allow you to control the RSTP parameter from the bridge point of view. • Designated Root Bridge: The bridge identifier of the root of the spanning tree is determined by the RSTP protocol as executed by this node. The bridge identifier value is used as the Root Identifier parameter in all configuration bridge PDUS originated by this node. • Priority: configures the priority of the current bridge. • Max Age: configures the maximum age of the current bridge. This is the maximum age of spanning tree protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using. 4-26 v1.0, May 2007 Configuring the Switch