Netgear GS108T GS108T Setup Manual - Page 67
Apply, VLAN Group Setting, Port-Based VLAN
UPC - 606449051377
View all Netgear GS108T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
GS108T Smart Switch Software Administration Manual . Figure 4-34 2. Input the PVID for each port. 3. Click Apply. Note: If you want to change the port's default PVID, you must first add the VLAN Group including the port. Port-Based VLAN Single or multiple ports are grouped into a smaller virtual network, which is independent of the other ports. The switch supports 8 port-based VLANs. Any user-assigned VLAN cannot have member ports that belong to different port groups. Click VLAN Group Setting in the blue navigation panel. A screen similar to that shown below appears when Port-Based VLAN is selected for the VLAN group setting. Configuring the Switch v1.0, May 2007 4-13
GS108T Smart Switch Software Administration Manual
Configuring the Switch
4-13
v1.0, May 2007
.
2.
Input the
PVID
for each port.
3.
Click
Apply
.
Port-Based VLAN
Single or multiple ports are grouped into a smaller virtual network, which is independent of the
other ports. The switch supports 8 port-based VLANs. Any user-assigned VLAN cannot have
member ports that belong to different port groups.
Click
VLAN Group Setting
in the blue navigation panel. A screen similar to that shown below
appears when
Port-Based VLAN
is selected for the VLAN group setting.
Figure 4-34
Note:
If you want to change the port's default PVID, you must first add the VLAN
Group including the port.