Netgear GS108T GS108T Setup Manual - Page 75
Sniffer Mode, Disable, Ingress, Source Ports, Apply - mirroring
UPC - 606449051377
View all Netgear GS108T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
GS108T Smart Switch Software Administration Manual . Figure 4-41 2. Sniffer Mode: Select the sniffer mode: • Disable: disable port mirroring globally. • Ingress: mirroring only the ingress traffic to the designated source ports. • Egress: mirroring only the egress traffic to the designated source ports. • Both: mirroring both incoming and outgoing traffic on the designated source ports. 3. Sniffer Port: Select from 1 to 8 ports. 4. Source Ports: Select any number of ports to be monitored (mirrored). The ports can not be the sniffer port. 5. Click Apply to update the monitor settings. Configuring the Switch v1.0, May 2007 4-21
GS108T Smart Switch Software Administration Manual
Configuring the Switch
4-21
v1.0, May 2007
.
2.
Sniffer Mode
: Select the sniffer mode:
•
Disable
: disable port mirroring globally.
•
Ingress
: mirroring only the ingress traffic to the designated source ports.
•
Egress
: mirroring only the egress traffic to the designated source ports.
•
Both
: mirroring both incoming and outgoing traffic on the designated source ports.
3.
Sniffer Port
: Select from 1 to 8 ports.
4.
Source Ports
: Select any number of ports to be monitored (mirrored). The ports can not be the
sniffer port.
5.
Click
Apply
to update the monitor settings.
Figure 4-41